W
EB
S
OFTWARE
C
ONFIGURATION
R
EVISED
2018-09-21
E
VENT
L
OG
D
RAWING
N
O
. LP0991-G
2-18
N-Tron
®
Series NT24K
®
Software Manual
Modify:
Display the Modify Event Log Configuration page.
Refresh:
Refresh the current Event Log display.
Clear Log:
Remove all entries from the event log and then add “The event log has been cleared.” message.
The Modify Event Log Configuration page controls whether Event Logging is Enabled or Disabled.
Event Log Status:
Select Enabled/Disabled.
Update:
Set the new Event Log Status.
Cancel:
Return to Event Log View without modifying Event Log Status.
The entire Event Log may be exported to the host PC for further analysis and archiving purposes. It will contain all
events that occurred while Event Log was enabled since the last Clear Log event.
On the File Transfer
Firmware/Config page, select Transfer Type: Export Event Log from switch.
Click on Event Log in the Export Event Log from switch panel, and select the storage location for the exported file
on the PC.
The default file name is “eventlog.csv”, which outputs each line in the Event Log as comma separated fields with
the final text field surrounded by quotation marks. This file can be viewed with a spreadsheet application or a
simple text file viewer.
The Cancel button selection will return to the Product Information page without executing any transfers.
