red lion N-Tron Series Software User Manual Download Page 119

Page: 119 / 146

EVISED

2018-09-21

ONFIGURATION

OFTWARE

RAWING

. LP0991-G

IME

N-Tron

Series NT24K

Software Manual

2-110

2.25.3

Precision

Time

Protocol

(PTP)

2.25.3.1

PTP

Basic

Configuration

The PTP Basic Configuration View displays the PTP Mode and allows the administrator to disable the protocol, or
enable one of two clock modes, Boundary or Transparent.

PTP Mode:

This field indicates whether PTP is disabled, operating as a Boundary clock, or operating as a

Transparent clock.

Click on the

Modify

button to change the PTP Mode. When the desired mode has been selected, click

Update

Note:

When switching between PTP modes, it will be necessary to save the configuration and reboot the
switch for changes to apply.

Summary of Contents for N-Tron Series



















































































































































Search results

Summary of Contents for N-Tron Series

Reviews:

Related manuals for N-Tron Series

Brands by name

Popular brands

red lion N-Tron Series, Software User Manual

Search results

Summary of Contents for N-Tron Series

Reviews:

Related manuals for N-Tron Series

Brands by name

Popular brands