R
EVISED
2018-09-21
P
ORTS
D
RAWING
N
O
. LP0991-G
C
ONFIGURATION
N-Tron
®
Series NT24K
®
Software Manual
2-75
Role:
A comma separated list of all the active roles for the port, which are based on the switch configuration.
The possible roles are RSTP, N-Ring, N-Link Control, N-Link Partner, and N-Link Coupler. For example, if a
port is actively participating in an N-Ring and as an N-Link Partner, the role would be: N-Ring, N-Link Partner.
Port State:
This column displays the current RSTP status of a port. It may contain
Disable
,
Discarding
,
Learning
or
Forwarding
.
PVID:
This configurable field displays the existing port VLAN ID setting. The allowable range is 1-4094.
Trunk ID:
When the port is an active member of a trunk group, the trunk’s ID value is shown. A zero value
indicates that the port is not an active trunk member.
Usage Alarm Low [%]:
This field indicates the bandwidth utilization percentage below which a fault is
triggered if enabled. For the half-duplex option, the bandwidth utilization percentage is the sum of both RX and
TX bandwidth utilization. For the full-duplex option, this is the higher of TX or RX bandwidth utilization.
Usage Alarm High [%]:
This field displays the bandwidth utilization percentage above which a fault is
triggered if enabled. For half duplex the bandwidth utilization percentage is the sum of both RX and TX band-
width utilization, and for full duplex this is the lower of TX or RX bandwidth utilization.
PoE Status:
The current status of the PoE will be displayed in this column. It may show
Inactive
,
Active,
Disabled
or
N/A
.
Click on the
Port Number
to configure each port individually. This will allow the user to change the port’s settings.
Click on the
Update
button. To save the changes made, navigate to the
Configuration
menu and click on the
Save
button.
