red lion N-Tron Series Software User Manual Download Page 50

Page: 50 / 146

EVISED

2018-09-21

OFTWARE

ONFIGURATION

RAWING

. LP0991-G

DHCP R

ELAY

GENT

ONFIGURATION

N-Tron

Series NT24K

Software Manual

2-41

Click on the

Modify

button to open the DHCP Server Configuration Modification page.

Modify

Page

Click on the

Update

button to apply the changes.

Relay Agent Status:

Indicates whether the DHCP relay agent is active. The default is Disabled.

Relay Agent ID Format:

The format selector with options for IP address, MAC address, Client ID, Other

String, or Other Hex characters.

Relay Agent ID:

A unique identifier that designates this relay agent switch.

DHCP Server 1-4 IP:

The configured IP address of the DHCP servers.

Enable:

Indicates whether relay agent functionality is enabled for the port.

Port No:

The number of the port. This field is read-only.

Port Name:

The descriptive name of the port. This field is read-only.

Circuit ID:

When enabled, the Circuit ID for the port can be specified. By default, the Circuit ID is set to the

MAC Address of the port. Circuit IDs must be unique for each port.

Circuit ID Format:

The format selector with options for MAC, Hex, and String.

Summary of Contents for N-Tron Series



















































































































































Search results

Summary of Contents for N-Tron Series

Reviews:

Related manuals for N-Tron Series

Brands by name

Popular brands

red lion N-Tron Series, Software User Manual

Search results

Summary of Contents for N-Tron Series

Reviews:

Related manuals for N-Tron Series

Brands by name

Popular brands