red lion N-Tron Series Software User Manual Download Page 105

Page: 105 / 146

EVISED

2018-09-21

ONFIGURATION

OFTWARE

RAWING

. LP0991-G

ECURITY

N-Tron

Series NT24K

Software Manual

2-96

2.22.4

802.1x/Configuration

The Configuration dialog window displays the 802.1x status, reauthentication information, and RADIUS server
information.

Note:

Bypass Relay models affect the implementation of this protocol. For more information, see

section

1.2.11 Bypass Relay (BR) on page 5

To make changes to the Security settings, click on the

Modify

button and the fields shown below will become

editable:

802.1x Status:

This field indicates whether the 802.1x feature is enabled or disabled. At least one RADIUS server

must be specified for 802.1x to be enabled. Ports must also be individually enabled on the ports configuration
page.

Default Reauthentication Status:

Select whether the 802.1x Reauthentication option is enabled or disabled. With

reauthentication enabled, a device will be required to reauthenticate itself based on the time period specified by the
reauthentication timeout field. 802.1x must be disabled to change this value.

Summary of Contents for N-Tron Series



















































































































































Search results

Summary of Contents for N-Tron Series

Reviews:

Related manuals for N-Tron Series

Brands by name

Popular brands

red lion N-Tron Series, Software User Manual

Search results

Summary of Contents for N-Tron Series

Reviews:

Related manuals for N-Tron Series

Brands by name

Popular brands