R
EVISED
2018-09-21
W
EB
C
ONFIGURATION
S
OFTWARE
D
RAWING
N
O
. LP0991-G
T
IME
N-Tron
®
Series NT24K
®
Software Manual
2-116
Slave Announce Timeout:
This only applies to Boundary Clock mode. This value determines the number
of announce intervals that must elapse without receipt of an announce message before a non-communi-
cating Master is marked as unavailable. The default value is 3 intervals. The slave value is dynamically
updated by the PTP protocol and may differ from the setting.
Slave Sync Interval:
This only applies to Boundary Clock mode. This log
2
value determines how often a
sync message will be sent. The default value of "-1" is twice per second. The slave value is dynamically
updated by the PTP protocol and may differ from the setting.
Slave Delay Request Interval:
This only applies to Boundary Clock mode. This log
2
value determines
how often the switch will request a path delay measurement from its Master. The default value of "0" is
once per second. The slave value is dynamically updated by the PTP protocol and may differ from the set-
ting.
PTP Port Status
Port No:
The number of the port.
Port Name:
The descriptive name of the port.
PTP Port Mode:
The operation mode of the PTP port. Values are "Enabled", "Disabled/Pass-Through"
(default), or "Disabled/Blocked".
PTP Port State:
The current PTP state of a port. It should be noted that when PTP is in Transparent Clock
mode the port state is not applicable and will not be displayed.
