R
EVISED
2018-09-21
W
EB
S
OFTWARE
C
ONFIGURATION
D
RAWING
N
O
. LP0991-G
DHCP S
ERVER
C
ONFIGURATION
N-Tron
®
Series NT24K
®
Software Manual
2-43
DHCP Server Status:
Indicates whether the DHCP server is active. The default is Disabled.
Show/Hide Advanced:
Button used to toggle whether or not to show advanced settings.
Accept Broadcast Requests:
Indicates whether the DHCP server will process broadcast messages.
Typically, client requests are broadcast and relay agent requests are unicast. When enabled, the server will
respond to broadcast requests. When disabled, the server will ignore broadcast requests. The default is
Enabled.
Delay Broadcast Responses(Ms):
The amount of time (in milliseconds) that the DHCP server will delay the
processing of a broadcast message. This setting is used when clients and relay agents are on the same subnet
and/or VLAN. A delay provides the opportunity for relay agent requests to be honored before client requests.
This setting only applies when Allow Broadcast is Enabled. The range is 0-2500 and the default is 500.
2.15.1
DHCP
Server
Current
Leases
The Current Leases table shows the IP addresses that have been leased, or offered, to devices.
Sort By:
Sort the current leases by Pool Name, Binding Identifier, MAC Address, IP Address, Status,
Remaining Lease, or Label.
Pool Name:
The pool from which the lease was obtained.
Binding Identifier:
The client associated with the lease entry. If Show Hex checkbox is checked, then detailed
hex data about the Binding Identifier is displayed.
MAC Address:
Indicates the MAC address of the client associated with the lease.
IP Address:
Indicates the IP address assigned to the lease entry.
Status:
Indicates the current status of the lease entry.
• Dynamic
=
Assigned
dynamic
IP.
• Static
=
Assigned
static
IP.
Remaining Lease:
The client's remaining lease time.
Label:
The descriptive name of the client.
Check Box:
Click the individual checkbox to either make the clients static or release its lease.
Note:
Only client with a dynamic lease can be made static.
Make Selected Static:
Make the selected client dynamic IP address static.
Release Selected:
Release selected client lease.
