Red Hat 8.1 Installation Manual Download Page 71

Page: 71 / 120

About .inf File Parameters

5.5.5.1. .inf File Directives

Directive

Description

Required

Example

FullMachineName

Specifies the fully
qualified domain name
of the machine on
which you are installing
the server. The default
is the local host name.

ldap.example.com

SuiteSpotUserID

Specifies the user
name as which the
Directory Server
instance runs. This
parameter does
not apply to the
user as which the
Administration Server
runs. The default is
user

nobody

on Linux

and

daemon

on HP-

UX. This should be
changed for most
deployments.

nobody

SuiteSpotGroup

Specifies the group
as which the servers
will run. The default
is group

nobody

Linux and

daemon

HP-UX. This should
be changed for most
deployments.

nobody

ConfigDirectoryLdapURL Specifies the LDAP

URL that is used
to connect to your
configuration directory.
LDAP URLs are
described in the

Directory Server

Administrator's Guide

Yes

ldap://
ldap.example.com:389/
o=NetscapeRoot

AdminDomain

Specifies the
administration domain
under which this
Directory Server
instance is registered.
See

Section 1.2.10,

“Administration

Domain”

for more

information about

example.com

Summary of Contents for 8.1

























































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Installation Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands