Red Hat 8.1 Installation Manual Download Page 34 | Manualshive

Page: 34 / 120

background image

Chapter 3. Setting up Red Hat Directory Server on Red Hat Enterprise Linux

24

This chapter describes the complete procedure to install Red Hat Directory Server on Red Hat
Enterprise Linux 5 (32-bit), including both OpenJDK and Directory Server packages, and the different
setup options.

3.1. Installing OpenJDK

Necessary Java libraries are not bundled with Directory Server. They must be downloaded and
extracted separately before installing the Directory Server packages.

Directory Server 8.1 requires Sun JDK 1.6.0 or OpenJDK 1.6.0.

IMPORTANT

When the new JDK is installed for Directory Server 8.1, it is no longer possible to manage
older instances of Directory Server using the Directory Server Console because the
required JDKs for the different Directory Server versions are different. You must migrate
any older instance to Directory Server 8.1 if you need to manage that instance with the
Directory Server Console.

To install OpenJDK:

yum install java-1.6.0-openjdk

OpenJDK is also available from

http://openjdk.java.net/install/

.

After installing the JDK, run

/usr/sbin/alternatives

as

root

to insure that the proper JDK is

available:

/usr/sbin/alternatives --config java

There are 3 programs which provide 'java'.

  Selection    Command
-----------------------------------------------
   1           /usr/lib/jvm/jre-1.4.2-gcj/bin/java
   2           /usr/lib/jvm/jre-1.6.0-openjdk/bin/java
*+ 3           /usr/lib/jvm/jre-1.6.0-sun.x86_64/bin/java

After installing the JDK, install the Directory Server packages, as described in

Section 3.2, “Installing

the Directory Server Packages”

.

3.2. Installing the Directory Server Packages

1. Install the Directory Server packages. There are two options for installing the packages: using

native Red Hat Enterprise Linux 5 (32-bit) tools (

yum

) or downloading them from Red Hat Network.

The recommended way is to use the Red Hat Enterprise Linux 5 (32-bit) tools.

yum install redhat-ds

«
...
32
33
34
35
36
...
»

Summary of Contents for 8.1

























































































































Reviews:

No comments

Related manuals for 8.1

Enterprise Server S80

Brand: IBM Pages: 282

Brand: IBM Pages: 92

Brand: Digital Equipment Pages: 73

xPico XPW100A003-01-B

Brand: Lantronix Pages: 54

Brand: AIC Pages: 101

Brand: Altos Pages: 93

NPort W2150Plus Series

Brand: Moxa Technologies Pages: 167

Past Ethernet Combo Print Server PS-1216U

Brand: Edimax Pages: 23

SX-Aurora TSUBASA A300-2

Brand: NEC Pages: 30

SX-Aurora TSUBASA A300-4

Brand: NEC Pages: 31

Brand: NEC Pages: 134

Brand: JIEYUN TECHNOLOGY Pages: 25

Brand: Advantech Pages: 76

Brand: Advantech Pages: 92

SuperStorageSystem SSG-2028R-DN2R24L

Brand: Supermicro Pages: 82

TwinPro 1029TP-DC0R

Brand: Supermicro Pages: 136

Multi-Port Fast Ethernet Print Server FPS-3121

Brand: Planet Pages: 12

Brand: DEVA Pages: 90

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands