Red Hat 8.1 Installation Manual Download Page 87 | Manualshive

Page: 87 / 120

background image

Migrating Replicated Servers

77

3. On the machine where your legacy Directory Server is installed, install the Directory Server 8.1

packages.

IMPORTANT

Do

not

set up the new Directory Server instances with

setup-ds-admin.pl

before

running the migration script.

4. Run the migration script, as

root

.

# /usr/sbin/migrate-ds-admin.pl --oldsroot /opt/redhat-ds/
General.ConfigDirectoryAdminPwd=password

/opt/redhat-ds/

is the directory where the old Directory Server is installed.

The migration process starts. The legacy Directory Server is migrated, and a new Directory Server 8.1
instance is installed using the configuration information from the legacy Directory Server.

IMPORTANT

Always

verify the Directory Server configuration after migrating from 7.1 to 8.1. Some

configuration settings, like

passwordMinLength

for a global password policy, are not

migrated.

Review all policy settings in the new 8.1 instance and make any changes before putting
the system into production.

6.2.4. Migrating Replicated Servers

The process for migrating a replicated system is the same as for a single server, but the order in
which the Directory Server instances is important to keep from interrupting replication. First migrate
all master servers, then all hubs, and then all consumers. If any Directory Server the in replicated
system will be moved to a different machine or a different platform, use the

--actualsroot

and

--cross

parameters with

migrate-ds-admin.pl

, as described in

Section 6.2.5, “Migrating a

Directory Server from One Machine to Another”

and

Section 6.2.6, “Migrating a Directory Server from

One Platform to Another”

.

NOTE

On Red Hat Enterprise Linux 5 (32-bit) machines, the

migrate-ds-admin

tool is in the

/usr/sbin

directory. On HP-UX machines, the

migrate-ds-admin

is in the

/opt/

dirsrv/sbin/

directory.

To migrate a replicated site, do the following:

1. Stop all old Directory Server instances and the Administration Server.

2. Back up all the Directory Server user and configuration data.

3. Stop directory writes to the master or hub server being migrated.

«
...
85
86
87
88
89
...
»

Summary of Contents for 8.1

























































































































Reviews:

No comments

Related manuals for 8.1

imagePRESS Server G200

Brand: Canon Pages: 82

Brand: Canon Pages: 88

Brand: Xerox Pages: 8

SUPERSERVER 6034H-X8R

Brand: Supermicro Pages: 128

Brand: Buffalo Pages: 2

DLAP-201 Series

Brand: ADLINK Technology Pages: 39

Brand: Icy Box Pages: 17

Brand: Infrant Technologies Pages: 98

Brand: QNAP Pages: 61

Brand: Siemens Pages: 48

SINUMERIK 840Di sl/840D sl

Brand: Siemens Pages: 250

Brand: Koon Technology Pages: 20

Brand: Black Box Pages: 3

Brand: UNIVIEW Pages: 30

Brand: AirLive Pages: 106

Brand: 360 Systems Pages: 148

TIGPT1U - Carrier Grade Server

Brand: Intel Pages: 89

S815EBM1 - Server Board Motherboard

Brand: Intel Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands