Typical Setup
31
12. Enter the Directory Server identifier; this defaults to the hostname.
Directory server identifier [example]:
The server identifier must not contain a period (.) or space character.
13. Enter the directory suffix. This defaults to
dc=
domain name
. For example:
Suffix [dc=example, dc=com]:
14. Set the Directory Manager username. The default is
cn=Directory Manager
.
15. Set the Directory Manager password and confirm it.
16. Enter the Administration Server port number. The default is
9830
, but if that port is in use, the
setup
program supplies a randomly generated one.
Administration port [9830]:
17. The last screen asks if you are ready to set up your servers. Select
yes
.
Are you ready to set up your servers? [yes]:
Creating directory server . . .
Your new DS instance 'example2' was successfully created.
Creating the configuration directory server . . .
Beginning Admin Server reconfiguration . . .
Creating Admin Server files and directories . . .
Updating adm.conf . . .
Updating admpw . . .
Registering admin server with the configuration directory server . . .
Updating adm.conf with information from configuration directory server . . .
Updating the configuration for the httpd engine . . .
Restarting admin server . . .
The admin server was successfully started.
Admin server was successfully reconfigured and started.
Exiting . . .
Log file is '/tmp/setupulSykp.log'
When the
setup-ds-admin.pl
script is done, then the Directory Server is configured and running.
To log into the Directory Server Console to begin setting up your directory service, do the following:
1. Get the Administration Server port number from the
Listen
parameter in the
console.conf
configuration file.
grep \^Listen /etc/dirsrv/admin-serv/console.conf
Listen 0.0.0.0:
9830
2. Using the Administration Server port number, launch the Console.
