Red Hat 8.1 Installation Manual Download Page 98

Page: 98 / 120

Chapter 7. General Usage Information

File or Directory

Location

Init scripts

/etc/rc.d/init.d/dirsrv

and

/etc/

sysconfig/dirsrv

/etc/rc.d/init.d/dirsrv-admin

and

etc/sysconfig/dirsrv-admin

Tools

/usr/bin/

/usr/sbin/

Table 7.2. Red Hat Enterprise Linux 4 and 5 (x86_64)

File or Directory

Location

Log files

/var/opt/log/dirsrv/slapd-

instance

Configuration files

/etc/opt/dirsrv/slapd-

instance

Instance directory

/opt/dirsrv/slapd-

instance

Database files

/var/opt/dirsrv/slapd-

instance

Runtime files

/var/opt/dirsrv/

instance

Binaries

/opt/dirsrv/bin/

/opt/dirsrv/sbin/

Libraries

/opt/dirsrv/lib/

Table 7.3. HP-UX 11i (IA64)

7.2. LDAP Tool Locations

Red Hat Directory Server uses Mozilla LDAP tools — such as

ldapsearch

ldapmodify

, and

ldapdelete

— for command-line operations. The MozLDAP tools are installed with Directory Server

and are located in the

/usr/lib/mozldap

and

/usr/bin/mozldap6/

directories on Red Hat

Enterprise Linux and in the

/opt/dirsrv/bin/mozldap/

directory on HP-UX. When running any

LDAP command, make sure that you are using the MozLDAP utilities, otherwise the command will
return errors.

For most Linux systems, OpenLDAP tools are already installed in the

/usr/bin

directory. These

OpenLDAP tools will not work for Directory Server operations.

7.3. Starting the Directory Server Console

There is a simple script to launch the Directory Server Console. On Red Hat Enterprise Linux 5 (32-
bit), this is in the

/usr/bin

tool directory, so it can be run as follows:

redhat-idm-console

HP-UX has a different location for the script:

/opt/dirsrv/bin/redhat-idm-console

Summary of Contents for 8.1

























































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Installation Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands