Red Hat 8.1 Installation Manual Download Page 5 | Manualshive

Page: 5 / 120

background image

v

Preface

This installation guide describes the Red Hat Directory Server 8.1 installation process and the
migration process. This manual provides detailed step-by-step procedures for all supported operating
systems, along with explanations of the different setup options (express, typical, custom, and silent),
additional options for Directory Server instance creation, migrating previous versions of Directory
Server, and troubleshooting and basic usage.

IMPORTANT

Directory Server 8.1 provides a migration tool for upgrading or migrating from earlier
Directory Server versions. If you already have a Directory Server deployment that is
supported for migration, you must use the documented migration procedure to migrate
your data and configuration to version 8.1.

Chapter 6, Migrating from Previous Versions

has for more information.

To become more familiar with directory service concepts, consult the

Red Hat Directory Server

Deployment Guide

; that manual is designed to help you plan the most effective directory service for

your organization's requirements. For instructions on using Directory Server itself, refer to the

Red Hat

Directory Server Administrator's Guide

.

The Directory Server setup process requires information specific to the Directory Server instance
being configured, information about the host names, port numbers, passwords, and IP addresses that
will be used. The setup program attempts to determine reasonable default values for these settings
based on your system environment. Read through this manual before beginning to configure the
Directory Server to plan ahead what values to use.

TIP

If you are installing Directory Server for evaluation, use the express or typical setup mode.
These processes are very fast, and can help get your directory service up and running
quickly.

IMPORTANT

Red Hat Directory Server 8.1 introduces filesystem paths for configuration files, scripts,
commands, and database files used with Directory Server which comply with Filesystem
Hierarchy Standard (FHS). This file layout is very different than previous releases of
Directory Server, which installed all of the files and directories in

/opt/redhat-ds

or

/opt/netscape

. If you encounter errors during the installation process, look at

Section 7.7, “Troubleshooting”

. For more information on how the file layout has changed,

see

Section 7.1, “Directory Server File Locations”

.

The latest Directory Server release is available for your platform and operating system through

Red

Hat Network

(RHN) at

http://rhn.redhat.com/

.

«
...
3
4
5
6
7
...
»

Summary of Contents for 8.1

























































































































Reviews:

No comments

Related manuals for 8.1

Brand: Longshine Pages: 56

SUPERSERVER 6027R-TRF

Brand: Supero Pages: 102

FusionServer 1288H V5

Brand: xFusion Digital Technologies Pages: 96

Brand: Black Box Pages: 30

PRIMERGY TX2540 M1

Brand: Fujitsu Pages: 92

PRIMERGY TX200 S5

Brand: Fujitsu Pages: 114

PRIMERGY TX300 S5

Brand: Fujitsu Pages: 142

PRIMERGY TX200 S6

Brand: Fujitsu Pages: 126

Server PRIMERGY TX1330 M1

Brand: Fujitsu Pages: 336

PRIMERGY TX300 S6

Brand: Fujitsu Pages: 122

Brand: Fujitsu Pages: 86

Brand: Fujitsu Pages: 109

PRIMERGY TX200 S5

Brand: Fujitsu Pages: 110

PRIMERGY TX300 S5

Brand: Fujitsu Pages: 118

Brand: Fujitsu Pages: 115

PRIMERGY TX200 S7

Brand: Fujitsu Pages: 90

PRIMERGY TX200 S6

Brand: Fujitsu Pages: 124

PRIMERGY TX2540 M1

Brand: Fujitsu Pages: 422

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands