Red Hat 8.1 Installation Manual Download Page 86

Page: 86 / 120

Chapter 6. Migrating from Previous Versions

Server Console are written to

server1

, then replicated over. Modify the Directory Server Console on

the second server (

server2

) so that it writes its own Console instance instead of

server1

's.

1. Shut down the Administration Server and Directory Server.

2. Change the

adm.conf

file for the Administration Server to reflect

server2

Directory Servers

values:

ldapurl: ldap://server2.example.com:389/o=NetscapeRoot

3. Change the

dse.ldif

for the Directory Server to reflect

server2

Directory Server's values:

vim

serverRoot

/slapd-

serverID

/config/dse.ldif

nsslapd-pluginarg0: ldap:///server2.example.com:389/o=NetscapeRoot

4. Turn off the Pass-through Authentication Plug-in on

server2

by editing its

dse.ldif

file and

setting the

nsslapd-pluginEnabled

value to

off

vim

serverRoot

/slapd-

serverID

/config/dse.ldif

dn: cn=Pass Through Authentication,cn=plugins,cn=config
nsslapd-pluginEnabled:

off

5. Restart the Directory Server and Administration Server.

6.2.3. Migrating a Server or Single Instance

To migrate a Directory Server installation to a new one on the same machine, run the migration script,
specifying the old server root directory:

/usr/sbin/migrate-ds-admin.pl --oldsroot /opt/redhat-ds
General.ConfigDirectoryAdminPwd=password

That command automatically migrates every Directory Server instance configured. To migrate
specific instances, use the

instance

with the

migrate-ds-admin

tool. For example, to migrate

the Directory Server instance named

example

and

example3

, but not

example2

, the migration

command would be as follows:

/usr/sbin/migrate-ds-admin.pl --oldsroot /opt/redhat-ds --instance example --instance example3
General.ConfigDirectoryAdminPwd=password

NOTE

On Red Hat Enterprise Linux 5 (32-bit) machines, the

migrate-ds-admin

tool is in the

/usr/sbin

directory. On HP-UX machines, the

migrate-ds-admin

is in the

/opt/

dirsrv/sbin/

directory.

1. Stop all old Directory Server instances and the Administration Server.

2. Back up all the Directory Server user and configuration data.

Summary of Contents for 8.1

























































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Installation Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands