Operator Unit
130--613
64
3648/130--613.DOC010102
Edition: November 28, 2005
6.3.1.4
Speed Source
With this function the source of the speed resp. the kind of the speed, which is
necessary for the speed error correction, can be selected.
This function can not be adjusted in DV--bus operation,
because the speed sensor is not connected to the distribu-
tion unit (Display information by selecting this menu is
“Not accepted”).
The same happens if no external speed sensor is con-
nected.
Basic menu ----> select “Menu” line ----> select “Service” line ----> select function “Speed
Source.”.
Dim
Up
Dim
Down
Speed Source
Set
Puls--Log
(selected)
VHW
(available)
VTG
(available)
VBW Wtr.
(not available)
VBW Gnd
(not available)
Exit
Service Timeout in 55 s
Select
Figure 63: Controls and Indicators on the Operator Unit
( Function ”Speed Source“ selected)
Default adjustment is “Puls--Log”.
Other speed sources may be selected by the softkey “Select” (Figure 63/1) and the
softkey “Set” (Figure 63/2).
The telegram types VTG or VBW have to be used
preferably because they transfer a more exact
speed value in relation to the others.
