55M4300CCE00 Rev A
UP button. Press to move up the screen when in a menu or to
increase the value of a highlighted number.
DOWN button. Press to move down the screen when in a menu or
to decrease the value of a highlighted number.
ESCAPE button. Press to exit a menu or to escape an option
without saving.
SELECT button. Press to enter a selection when in a menu or to
accept a changed value. Note that most changed values must also
be saved to permanently store them.
1
INTRODUCTION
This manual contains calibration information for the i4300 system. When performing
calibration of the i4300 system, always observe the safety rules and regulations
applicable in the country of operation to reduce the risk of personal injury or damage to
the equipment. Each safety instruction throughout this manual must be taken into
consideration when using the i4300 system. The information contained in this manual
will enable qualified personnel to properly operate and efficiently perform calibration.
Personnel qualification and scope of this manual
Installation of the i4300 system shall be performed by a qualified technician.
Furthermore, calibration of the i4300 system
must be
performed by a
RaycoWylie
trained technician. The
RaycoWylie
technician will perform a complete and structured
verification of the whole system before beginning the system’s calibration.
Failure to calibrate the system properly can result in overloading of the crane risking
machine breakage or tipping that could result in serious injury or death. Always refer to
a
RaycoWylie
trained technician to calibrate your system.
Using this manual
This manual must be used in conjunction with the Instruction Manual, refer to the
instruction manual for description of the system operation, especially the section
“Operating Buttons Description”.
Screenshots used in this manual are taken from a 4.3” display and some screens may
vary on larger display versions; calibration procedures, descriptions and functions are
identical for all display versions. All numbers shown on sample screens are examples
only and must be substituted with real information from the machine.
Navigating screens and editing data:
Summary of Contents for i4300
Page 2: ...55M4300CCE00 Rev A ...
