55M4300CCE00 Rev A
2)
Select “transfer from system to USB (backup)” ” and press
“
”
3)
Select “calibration -> USB stick” ” and press
“
”
, a copy of the calibration
information will be created in a file called “cranename_000000.cal” located in
the root folder of the USB memory stick. If a file of this name already exists ie a
previous backup has been made then the new file will become
“cranename_000000-1.cal” etc.
The final completed calibration file should be renamed:
“cranename_serialnumber_date_tech.cal”
where serialnumber is the serial number of
the i4300 system, the date is the date the calibration file is completed/downloaded and
tech is the initials of the calibrating technician.
For early operating systems prior to rev sc122…v0200, some configuration specific
calibration data may be stored in the load chart file and, for these versions only, it is
recommended to also make a backup copy of this second file:
Select “load chart -> USB stick” ” and press
“
”
, a copy of the load chart file will be
created in a file called “cranename”, this file will overwrite any existing file of the same
name and will not have a file extension included. This file should be renamed
“cranename_serialnumber_date_tech.cf”
and stored as a matching pair with the cal
file above. A copy of these files should be sent to Rayco Wylie for archive purposes.
Summary of Contents for i4300
Page 2: ...55M4300CCE00 Rev A ...
