Rapid 2005, Installation, Operation & Service Manual

Page: 69 / 162

SECTION 12: I
NLET
H
OOD
59 of 147
Step 12.3.7
For inlet hoods w ith permanent al u min u m mesh filters, contin u e to Step 12.3.9 .
For inlet hoods w ith birdscreen, no filters, contin u e to
Step 12.3.8
.
For inlet hoods w ith moist u re limiter, contin u e to Step 12.3.10 .
Top Middle Panel 2
Top Back Panel 1
Attach top middle panel w ith fi v e TEK self-tapping scre w s on
each side and w ith six 5/16-18 x 1 bolts, 5/16 w ashers and 5/16
flange n u ts at the J-bend joint.
For Model 2020: Attach top back panel w ith fi v e TEK self-
tapping scre w s on each side, se v en TEK self-tapping scre w s to
the top mo u nting flange and w ith six 5/16-18 x 1 bolts, 5/16
w ashers and 5/16 flange n u ts at the J-bend joint.
For Model 2030:
Attach top back panel w ith fi v e TEK self-
tapping scre w s on each side, nine TEK self-tapping scre w s to
the top mo u nting flange and w ith six 5/16-18 x 1 bolts, 5/16
w ashers and 5/16 flange n u ts at the J-bend joint.
NOTE:
Ens u re that the side tabs of the roof panels are to the
o u tside of the side panels and that the J-bends interlock the
panel w ith the roof panel in front of it.
Description Part Number
Top Middle Panel #2 13205076 / 13305076
Top Back Panel #1 13205075 / 13305075
TEK Scre w 13404
5/16"-18 x 1 Bolt 20507
5/16" Flat Washer 95211600
5/16" N u t Flange 20509