Rapid 2005, Installation, Operation & Service Manual

Page: 71 / 162

SECTION 12: I
NLET
H
OOD
61 of 147
Step 12.3.10
Step 12.3.11
For inlet hoods w ith permanent al u min u m mesh filters, contin u e to Step 12.3.12 .
For inlet hoods w ith birdscreen, no filters, the instr u ctions end here.
For inlet hoods w ith moist u re limiter, contin u e to
Step 12.3.13
.
Caulk Caulk
Ca u lk the seams bet w een the inlet hood and the air handler/filter section and on the open sides of the
J-bends that lock the roof panels together.
NOTE: Do u ble-sided filter rails or filter
clips are not req u ired for inlet hood w ith
moist u re limiter.
Lower
Rail
Upper
Rail
When attaching the drip rail, ens u re that the drip rails are
positioned abo v e the filter clips, u sing the pro v ided holes in
the side w all panels. Attach drip rail to right side of inlet hood
starting w ith the lo w er drip rail u sing fi v e TEK self-tapping
scre w s. Attach the u pper right side rail by sliding it inside the
lo w er drip rail w here they o v erlap u se fi v e TEK self-tapping
scre w s. Attach drip rail to left side of inlet hood starting w ith
the lo w er drip rail u sing fi v e TEK self-tapping scre w s. Attach
the u pper right side drip rail by sliding it inside the lo w er drip
rail w here they o v erlap u se fi v e TEK self-tapping scre w s.
Apply ca u lk to the drip rails before attaching to the side
panels.
Description Part No.
Drip Rail Upper Right 13305092
Drip Rail Upper Left 13305093
Drip Rail Lo w er Right 13305094
Drip Rail Lo w er Left 13305095
TEK Scre w 13404