ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
Important:
This Document is customer property and is to remain with this unit.
The JMM4A series wall mount air handler is designed for installation in a closet, utility room,
alcove and can be wall mounted. These versatile units are applicable to air conditioning
applications. Field installed electric resistance heaters are available.
•
5, 7.5 and 10 kW SINGLE PHASE ELECTRIC
HEATERS
- Circuit breakers are standard on all single
phase 5, 7.5 and 10 kW heaters.
•
All aluminum coil.
•
Factory installed piston style refrigerant control-
Field installed TXV kits available.
•
Blower and coil slide out easily for maintenance.
•
Factory-sealed cabinet certified to achieve 2% or
less air leakage rate at 1.0 inch water column.
•
Front or bottom return air.
•
Painted finish on galvanized steel.
•
Sturdy polycarbonate drain pans.
- Air handler has factory installed drain pan and
is shipped for upflow applications only.
•
208/230 VAC operation.
•
Stud or wall mount installation.
•
Fully insulated cabinet.
•
3/4'' NPT primary and secondary drains.
•
AHRI certified and ETL listed.
A
18-GF12D1-1A-EN
JMM4A0A18S21SAA
JMM4A0A24S21SAA
JMM4A0B30S21SAA
JMM4A0B36S31SAA
