Ransomes HIGHWAY 213, Operator Instructions Manual

Page: 7 / 93

6
GB
While mowing, always wear substantial footwear
and long trousers. Do not operate the equipment
when barefoot or wearing open sandals.
Check the grass catcher frequently for wear or
deterioration. After striking a foreign object.
Inspect. the lawnmower for damage and make
repairs before restarting and operating the
equipment.
If the machine starts to vibrate abnormally, check
immediately.
TRANSPORTING
Ensure that the cutting units are securely fastened in
the transport position. Do not transport with cutting
mechanism rotating.
Drive the machine with due consideration of road
and surface conditions, inclines and local
undulations.
Sudden decelerating or braking can cause the rear
wheels to lift.
Remember that the stability of the rear of the
machine is reduced as the fuel is used.
IMPORTANT: Transport speed is for highway
use only. Never select transport speed on grass
areas or uneven or unsurfaced roads or tracks.
LEAVING THE DRIVING POSITION
Park the machine on level ground. Before leaving
the driving position, stop the engine and make sure
all moving parts are stationary. Apply brakes and
disengage all drives. Remove the starter key.
SLOPES
TAKE EXTRA CARE WHEN WORKING ON
SLOPES
Local undulations and sinkage will change the
general slope. Avoid ground conditions which can
cause the machine to slide. Keep machine speeds
low on slopes and during tight turns.
Sudden decelerating or braking can cause the rear
wheels to lift. Remember there is no such thing as
a “safe” slope. Travel on grass slopes requires
particular care.
DO NOT USE ON SLOPES GREATER THAN 15°
The slope 15° was calculated using static
stability measurements according to the
requirements of EN 836.
IMPORTANT: When working on any slope set
the weight transfer to its maximum (+) setting.