R&S QAR Series, User Manual

Page: 80 / 96

Remote Control - SCPI
R&S
®
QAR
80 User Manual 1178.7200.02 ─ 04
Prerequisites for this command:
●
Attenuation measurement results must be available.
Return values:
<State> 1
Measured attenuation is below threshold.
0
Measured attenuation is above threshold.
Example: //Query if attenuation is below threshold
MEAS:STAR
MEAS:OK?
Usage: Query only
MEASurement:THReshold <BumperType>, <Threshold>
MEASurement:THReshold? <BumperType>
This command sets/queries the threshold value of a bumper type.
Parameters:
<Threshold> Threshold value in dB
Parameters for setting and query:
<BumperType> String containing the bumper type name
Example: //Query the threshold value for the bumper type RR_L
:MEAS:THR? 'RR_L'
//Set a new threshold value for the bumper type RR_L
:MEAS:THR 'RR_L', 1.0
6.2.3.2 Configuration
Remote commands described elsewhere:
●
MEASurement:RESult:BCS:PORT
on page 68
●
MEASurement:RESult:BCS:USE
on page 69
●
MEASurement:RESult:DIRectory
on page 69
●
MEASurement:RESult:SAVE:AUTO
on page 69
●
MEASurement:RESult:SAVE:WBC
on page 70
●
MEASurement:RESult:SAVE:WHAT
on page 70
Remote Commands