Preparing for Use
R&S
®
QAR
24
User Manual 1178.7200.02 ─ 04
Figure 4-9: Lateral view - height and frontal distance
Figure 4-10: Top view - lateral distance
Installing the reference reflector
1. Hold the reference reflector to the stand.
Verify that the top of the reflector pins are parallel to the R&S
QAR front by using,
for example, a spirit level. Check the lateral distance by performing the verification
described in
2. Screw the reference reflector to the stand using the torx wrench.
4.2.5
Installing the R&S
QAR on the Platform (R&S
QAR-Z21)
Required tools:
●
Allen wrench size 5 (for screws ISO 10642 M8x20)
●
Allen wrench size 6 (for screws ISO 4762 M8x40)
●
Allen wrench size 10 (for screws ISO 4762 M12x55)
●
Open-end wrench size 19
●
Spirit level.
Installing the R&S
QAR
