R&S QAR Series, User Manual

Page: 47 / 96

Operating the R&S QAR
R&S
®
QAR
47 User Manual 1178.7200.02 ─ 04
Bumper type selection
Selects the configuration for the measurement (type of bumper you are measuring).
The configuration determines which pins of the reference reflector to use for the mea-
surement. The "default" configuration uses all pins.
Settings and control buttons
Several settings and buttons allow you to control the measurement.
●
"Measure"
Starts a measurement.
For more information, see
Chapter 5.2.3.2, "Attenuation Measurement" ,
on page 49.
●
"Save"
Saves the measurement results.
For more information, see
"Managing measurement results" on page 49.
●
"Normalize"
Starts the normalization.
For more information, see
Chapter 5.2.3.1, "Normalization" , on page 48.
●
System messages
Shows various status messages of the system like a missing normalization or the
remaining warm-up time. The full warm-up time is 90 minutes.
Menu bar
The menu bar contains various settings.
●
"File"
Contains functionality to import and export measurement results, and functionality
to close the software.
●
"Options"
Contains functionality to configure the measurement and result displays.
For more information, see
"Managing measurement results" on page 49.
●
"Info"
Contains various information about the software.
Keyboard shortcuts
The following keyboard shortcuts are available.
Table 5-2: Keyboard shortcuts
Ctrl-S Saves the currently displayed measurement results.
See "Managing measurement results" on page 49
for details.
Ctrl-O Opens a dialog box to load measurement results.
See "Managing measurement results" on page 49
for details.
Bumper Measurements