R&S QAR Series, User Manual

Page: 76 / 96

Remote Control - SCPI
R&S
®
QAR
76 User Manual 1178.7200.02 ─ 04
MEASurement:TRANsmission:NORMalization:REQuired?
This command queries the normalization state of the transmission measurement.
Return values:
<State> 0
Measurement is normalized.
1
Measurement is not normalized. In that case, you should nor-
malize the measurement before starting it.
Example: //Query normalization state
MEAS:TRAN:NORM:REQ?
Usage: Query only
MEASurement:TRANsmission:NORMalization:STARt
This command initiates the normalization of a transmission measurement.
We recommend to define a timeout of at least 10 seconds to allow for the measure-
ment to finish.
Example: //Normalize transmission measurement
MEAS:TRAN:NORM:STAR
Usage: Event
MEASurement:TRANsmission:VMOD <State>
This command turns the verification mode for a transmission loss measurement on and
off.
Setting parameters:
<State> ON | OFF | 1 | 0
*RST:
OFF
Example: //Turn on verification mode
MEAS:TRAN:VMOD ON
6.2.2.2 Configuration
Remote commands described elsewhere:
●
MEASurement:RESult:BCS:PORT
on page 68
●
MEASurement:RESult:BCS:USE
on page 69
●
MEASurement:RESult:DIRectory
on page 69
●
MEASurement:RESult:SAVE:AUTO
on page 69
●
MEASurement:RESult:SAVE:WBC
on page 70
●
MEASurement:RESult:SAVE:WHAT
on page 70
Remote Commands