R&S NRP2, User Manual

Page: 312 / 437

Remote Control - Commands
R&S
®
NRP2
294 User Manual 1173.9157.02 ─ 03
Command Status register
STATus:OPERation:ULFail[:SUMMary]? Operation Upper Limit Fail
STATus:OPERation:MEASuring[:SUMMary]? Operation Measuring
STATus:OPERation:SENSe[:SUMMary]? Operation Sense
STATus:OPERation:TRIGger[:SUMMary]? Operation Trigger
STATus:QUEStionable? Questionable Status
STATus:QUEStionable:CALibration[:SUMMary]? Questionable Calibration
STATus:QUEStionable:POWer[:SUMMary]? Questionable Power
STATus:QUEStionable:WINDow[:SUMMary]? Questionable Window
6.13.2 Configuration Commands
If the status register queries are extended by the character
strings
[:EVENt]
,
:CONDition
,
:ENABle
,
:PTRansition
or
:NTRansition
(without
a question mark "?" at the end), the respective subregisters can be accessed. The enable
and transition registers can also be set with these commands. The effect of the status
reporting system can thus be adapted to user requirements. The parameters have the
following meaning:
<status_register_summary_command> One of the status register queries from
​
table 6-15
​
Queries
for status registers is to be used here (without a terminating
question mark "?").
<NR1> Is a decimal value between 0 and 32767. The values
DEFault
,
MINimum
and
MAXimum
are not permissible.
<non-decimal numeric> Is a non-decimal value in one of the following formats, where
the decimal value must be between 0 and 32767:
●
binary (e. g. #b0111010101001110 or
#B0111010101001110)
●
hexadecimal (e.g. #h754e or #H754E)
●
octal (e.g. #q72516 or #Q75216)
Command Parameter Remark
<srsc> =
<status_register_summary_command>
<srsc>[:EVENt]? Query only
<srsc>:CONDition? Query only
<srsc>:ENABle[?] 0..32767 |<non-decimal
numeric>
<srsc>:NTRansition[?] 0..32767 | <non-decimal
numeric>
STATus