R&S NRP2, User Manual

Page: 243 / 437

Remote Control - Commands
R&S
®
NRP2
225 User Manual 1173.9157.02 ─ 03
CALCulate<[1]..8>:LIMit:BEEP <beep>
Switches the acoustic warning for limit violations on or off.
Parameters:
<beep> ON | OFF
*RST:
OFF
Usage: Setting only
CALCulate<[1]..8>:LIMit:CLEar[:IMMediate]
Resets the limit monitoring state and the internal counter for limit violations.
Usage: Event
CALCulate<[1]..8>:LIMit:CLEar:AUTO <auto>
Automatically resets the limit monitoring state and the internal counter for limit violations
if any of the following events occurs:
●
INITiate[:IMMediate]
is executed
●
INITiate:CONTinuous ON
is executed
●
MEASure?
or
MEASure:...?
query is executed.
●
READ?
or
READ:...?
query is executed.
Parameters:
<auto> ON | OFF | ONCE
ON
automatic reset enabled
OFF
automatic reset disabled
ONCE
automatic reset is enabled only once for the next occurrence of
the above events
*RST:
OFF
Usage: Event
CALCulate<[1]..8>:LIMit:FAIL?
Queries whether upper or lower limits have been exceeded. The status is reset (0 = no
limit violation) if one of the following events occurs:
●
The device is switched on
●
A reset is performed (*RST)
●
The
CALCulate<[1]..8>:LIMit:CLEar
command is sent.
Usage: Query only
CALCulate (Configuration of Calculate Blocks)