R&S NRP2, User Manual

Page: 202 / 437

Remote Control Fundamentals
R&S
®
NRP2
184 User Manual 1173.9157.02 ─ 03
SCPI command Value Remark
TRIGger[1..4]:SOURce EXTernal |
INTernal User-selectable.
TRIGger[1..4]:SLOPe POSitive |
NEGative User-selectable.
TRIGger[1..4]:COUNt 1 Cannot be modified in manual mode.
TRIGger[1..4]:DELay 0 S Cannot be modified in manual mode.
TRIGger[1..4]:HOLDoff Depends on sensor User-selectable.
TRIGger[1..4]:LEVel Depends on sensor User-selectable.
[SENSe[1..4]]:TIMing:EXCLude:
STARt 0 S Cannot be modified in manual mode.
[SENSe[1..4]]:TIMing:EXCLude:STOP 0 S Cannot be modified in manual mode.
INITiate[1..4]:CONTinuous ON Cannot be modified in manual mode.
5.10 Correspondence between Remote Control and Manual
Control
The following table compares the control elements of the graphical user interface for
manual control with the SCPI commands for remote control in order to simplify the transfer
of manual control procedures to a remote control program.
Menu item in manual control SCPI command in short form
Sensor
→
Mode
SENS[1..4]:FUNCtion
Sensor
→
Mode
→
ContAv
→
Aperture
SENS[1..4]:APER
Sensor
→
Mode
→
ContAv
→
Sampling Rate SENS[1..4]:SAMP
Sensor
→
Mode
→
ContAv
→
DutyCycle
SENS[1..4]:CORR:DCYC
Sensor
→
Mode
→
ContAv
→
DutyCycle SENS[1..4]:CORR:DCYC:STAT
Sensor
→
Mode
→
ContAv
→
Smoothing of Modu-
lated Signals
SENS[1..4]:SMO:STAT
Sensor
→
Mode
→
Burst
→
Dropout
SENS[1..4]:BURSt:DTOL
Sensor
→
Mode
→
Burst
→
Exclude Start SENS[1..4]:TIM:EXCL:STAR
Sensor
→
Mode
→
Burst
→
Exclude Stop
SENS[1..4]:TIM:EXCL:STOP
Sensor
→
Mode
→
Timeslot
→
No. of Timeslots
SENS[1..4]:POW:TSL:COUN
Sensor
→
Mode
→
Timeslot
→
Nominal Width SENS[1..4]:POW:TSL:WIDT
Sensor
→
Mode
→
Timeslot
→
Exclude Start
SENS[1..4]:TIM:EXCL:STAR
Sensor
→
Mode
→
Timeslot
→
Exclude Stop SENS[1..4]:TIM:EXCL:STOP
Sensor
→
Mode
→
Timeslot
→
Fence→Start
SENS[1..4]:TSL:EXCL:MID:OFFS
Correspondence between Remote Control and Manual Control