R&S 1322.8003K06, User Manual

Page: 384 / 555

Remote Control
R&S
®
FSPN
384 User Manual 1179.4363.02 ─ 01
CONFigure:SNTune:SWEep:STARt <Value>
This command defines the start value of the tuning range.
Parameters:
<Value> <numeric value>
The unit depends on whether you tune the VCO with a voltage
or current (see
CONFigure:SNTune:SWEep:SOURce
).
*RST: 0
Default unit: V or A
Example: See
CONFigure:SNTune:SWEep:SOURce
.
Manual operation: See "Defining the sweep range" on page 128
CONFigure:SNTune:SWEep:STOP <Value>
This command defines the stop value of the tuning range.
Parameters:
<Value> <numeric value>
The unit depends on whether you tune the VCO with a voltage
or current (see
CONFigure:SNTune:SWEep:SOURce
).
*RST: 0
Default unit: V or A
Example: See
CONFigure:SNTune:SWEep:SOURce
.
Manual operation: See "Defining the sweep range" on page 128
11.6.8.2 Trace Configuration
Commands to configure traces described elsewhere:
●
CALCulate<n>:SNOise<s>:AOFF
on page 372
●
CALCulate<n>:SNOise<s>:STATe
on page 372
●
CALCulate<n>:SNOise<s>:X
on page 372
●
DISPlay[:WINDow<n>]:TRACe<t>:MODE
on page 413
●
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>[:STATe]
on page 416
[SENSe:]SMOothing:APERture
....................................................................................... 384
[SENSe:]SMOothing[:STATe]
...........................................................................................385
[SENSe:]SPURs:SUPPress
............................................................................................ 385
[SENSe:]SPURs:THReshold
........................................................................................... 386
[SENSe:]SMOothing:APERture <Value>
This command defines the magnitude (aperture) of trace smoothing.
Common Measurement Settings