Raider 50 HP TLDI, Service Manual

Page: 58 / 193

4-3
a) Removing Power Unit
Removing Power Unit Removing Power Unit
Removing Power Unit
Disassemble the following components.
•
Fuel connector
•
Battery
•
Ring gear cover
Battery cable (Optional on Raider)
Disassemble the following components.
Begin by disassembling the oil tank;
Oil tank mounting bolts
•
Fuel hose (remove from fuel filter inlet)
Reinstall the oil tank with oil tank mounting bolts after then.
P PP P Type Type Type Type
Di
sassemble the following components.
Wire harness connectors: 3
Throttle cable from advancer arm
Shift cable from shift arm
Water hose from compressor
•
Ground connector from cylinder
F Type F Type F Type F Type
Disassemble the following components.
Wire harness connectors: 3 Neutral switch cable
Throttle cable from advancer arm and throttle cable bracket.
Shift cable joint rod from shift arm
S
”
- link from throttle stop arm
Water hose from compressor
•
Ground connector from cylinder