Raider 50 HP TLDI, Service Manual

Page: 49 / 193

3-6
2. 2. 2. 2. Inspecting Gear Case Are Inspecting Gear Case Are Inspecting Gear Case Are Inspecting Gear Case Areaaaa
•
To avoid accidental starting of engine while servicing, twist and
remove all spark plug leads.
Replacing Propeller Replacing Propeller Replacing Propeller Replacing Propeller
Worn or bent propeller blades will not only affect performance and
can also lead to engine damage.
•
Move the shift lever to the neutral position; stop the engine, then replace
the propeller.
•
Be sure to wear a thick pair of gloves and proceed carefully.
Remove the following components
Split pin. Replace with new pin
Propeller nut
Washer
Propeller stopper or adapter
Propeller or with drive sleeve
Propeller thrust holder or washer
Replacing Gear Oil
Replacing Gear Oil Replacing Gear Oil Replacing Gear Oil
•
Place an oil container under the lower unit and remove the lower
oil plug
•
Remove the upper oil plug and sufficiently drain the oil.
•
Insert the gear oil container spigot t into the lower oil plug hole and
squeeze the container until oil overflows from the upper oil plug hole .
Oil: Genuine gear oil or GL5,
SAE#80, #90
Capacity: 500m1, 16.9 US fI.oz
(approx.)
First tighten the upper oil plug ; then remove the oil container and
reinstall the lower oil plug .