Raider 50 HP TLDI, Service Manual

Page: 145 / 193

6-7
3. 3. 3. 3. Inspection Inspection Inspection Inspection
Inspect the following components.
Component Inspection points Remarks
Bevel gears A,B,C and
clutch
•
Wear and damage on pawls of bevel gears A and C.
•
Wear and damage on clutch pawl.
•
Meshing of bevel gears A,B and C and back lash* .
•
Wear on bearings for bevel gears A and C .
Replace.
Replace
.
Replace as necessary.
Replace as necessary
.
P r opeller shaft
•
Play between clutch and spline. Replace as necessary .
Driveshaft
•
Misalignment of driveshaft.
•
Wear on spline area.
•
Wear contact surface of needle roller bearing.
Replace . *
Replace as necessary.
Replace as necessary.
Water pump
•
Wear on pump impeller.
•
Wear and defamation of pump case liner.
•
Wear on pump guide plate.
•
Wear and cracking on the lip area of pump case lower o i l seal.
Replace.
Replace
.
Replace as necessary.
Replace as necessary.
* : Refer to the table on the next page listing the backlash readings and corresponding adjusting shim sizes.
＊:Refer to Chapter 2-2
.