Option
Description
Bottom
“Adjusting the Image Position” on page
20
Right
4.
From the web interface only, select Save.
Resolving Problems with PC Presentations
Problem
I cannot send a presentation from my PC.
Solution
Make sure the VGA/DVI cable is properly connected between the PC and the XT Codec Unit,
as described in
“Connecting a Computer to the Scopia XT Series” on page 46
Solution
Make sure the resolution of the PC output is supported by the XT Codec Unit (see
the Computer Display Resolution”
).
Resolving XT Remote Control Unit Problems
Problem
The XT Remote Control Unit does not function.
Solution
Replace the battery, as described in Scopia XT Series Installation Guide. When the XT
Remote Control Unit's battery power is low, an icon appears in the system menus letting you
know that you should replace the battery:
•
Half-charged Battery
•
Low Battery
Solution
If the battery power is not low, configure the XT Remote Control Unit code on the XT Codec
Unit to the same number that it is set on the XT Remote Control Unit, as described in
“Pairing an XT Remote Control Unit with a XT Codec Unit” on page 15
).
Solution
If you still experience problems, reconfigure the XT Remote Control Unit code to be a number
between 01-04, inclusive.
Restoring Default User Settings
This procedure explains how to restore the default settings if necessary, from the endpoint
itself.
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
Troubleshooting the Scopia XT Series | 70
