RADVision SCOPIA XT4000 Series, User Manual

Page: 24 / 78

•
“Setting the System Name and Language” on page 19 : Define your system's name, your
country, and preferred language for the interface.
•
“Adjusting the Image Position” on page 20 : Adjust your monitor's image if necessary.
•
“Configuring Network Settings” on page 22 : Define your system's network settings to
allow you to place and receive calls.
•
“Configuring Gatekeeper Settings” on page 24 : If your Scopia XT Series works in
conjunction with a gatekeeper, configure gatekeeper-related settings.
Setting the System Name and Language
You can select the name of your XT Codec Unit, to be displayed on the monitors participating
in the videoconference call (for example: Hong-Kong, or 9th-Floor-Room, or NY-Office).
You can also select the country in which the system is located and the language in which the
system menus are displayed.
Alternatively, you can define the language from the web interface, as described in
“Remotely
Setting the System Name and Language” on page 25 .
Before you begin
To access the quick setup wizard, see “Accessing the Quick Setup Procedure” on page 18 .
Note
After initial setup, you can modify these settings by selecting Configure > General from the
Main menu.
Procedure
Step 1
Enter the name of the Scopia XT Series in the System Name field using the alphanumeric keys
of the XT Remote Control Unit (for more information, see
“Using the XT Remote Control
Unit” on page 12 ).
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1 Getting Started | 19