Figure 2-7
Setting Country and Language
Step 2
Select the required country from the Country list using the arrow keys and press ok/menu.
The system menu and the Language field automatically change to the language used in the
selected country.
Step 3
If you want to change the language of the system menus, select Language and press
ok/menu. The list of languages is displayed. Scroll to the preferred language and press
ok/menu.
Step 4
To adjust the image on your monitor, select Next and continue with
Adjusting the Image Position
If your monitor does not center the image correctly, perform this procedure.
Before you begin
This procedure is performed as part of the Quick Setup Wizard, after
To access the quick setup wizard, see
“Accessing the Quick Setup Procedure” on page 18
Note
This can be done from the endpoint itself only.
Procedure
Step 1
Examine the image on the monitor to decide if you need to adjust the image position.
The triangles in the top left corner and bottom right corner must be fully visible so that the
white border of the triangle is fully visible on all sides.
If the image is centered correctly, skip this procedure and select Next.
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
Getting Started | 20
