If you are dialing from the Contacts, Recent Calls, or Direct Call page, select Edit next
to the number you are calling (for more information about navigating to these pages, see
“Dialing a Number from the Scopia XT Series Web Interface” on page 29
).
Figure 3-3
Changing advanced call settings
Step 2
Modify the call settings as described below.
From the endpoint interface, select options using arrow keys on XT Remote Control Unit and
confirm with the ok/menu key
Table 3-1
Advanced Calling Settings
Field Name
Description
Call protocol
If necessary, select the protocol to use when calling this
personal endpoint or meeting room:
•
H.323: Select for H.323 endpoints, such as other XT
Series endpoints, or when joining a videoconference
hosted by a Scopia Elite MCU.
•
SIP: Select for SIP endpoints, such as when calling
Microsoft Lync clients.
•
ISDN: If enabled, select to call ISDN endpoints.
Call rate
By default, the system uses either the maximum available
bandwidth or the rate you specified as the default call rate
for this contact (for details, see
Contacts in the Phone Book” on page 34
).
Call type
Select whether the call is Audio-Video or Audio-Only.
Step 3
Dial the number, as follows:
•
Using the XT Remote Control Unit, press
, or select Call and press ok/menu.
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
Making Point-to-Point Video Calls | 32
