RADVision SCOPIA XT4000 Series, User Manual

Page: 29 / 78

Step 3
To configure your gatekeeper's settings, select Next and continue with “Configuring
Gatekeeper Settings” on page 24 .
Configuring Gatekeeper Settings
A gatekeeper routes video calls by resolving dial strings (H.323 alias or URI) into the IP address
of an endpoint, and handles the initial connection of calls. If your Scopia XT Series works in
conjunction with a gatekeeper, configure gatekeeper-related settings as described in this
procedure.
This procedure completes the basic system configuration.
Before you begin
This procedure is performed as part of the basic configuration after “Configuring Network
Settings” on page 22 . Consult with your network administrator to configure these fields.
To access the quick setup wizard, see “Accessing the Quick Setup Procedure” on page 18 .
Note
If you are modifying these settings after initial setup, navigate to Configure > Network >
H.323 from the Main menu.
Procedure
Step 1
Set the Use Gatekeeper list to Yes.
Figure 2-11 Gatekeeper settings
Step 2
Set the Mode list to Manual.
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1 Getting Started | 24