1260-00C User Manual
Non-Volatile Configuration 5-8
Servant Area
This parameter specifies what Servant area value to return to the
Resource Manager during a Word Serial Read Servant Area
query. This applies only when the 1260-00C is not Resource
Manager.
GPIB Primary
This parameter specifies the GPIB primary address of the
1260-00C to be used when in multiple secondary addressing
mode.
GPIB Address
Assignment Method
This parameter specifies what method to use to configure the
GPIB address of the 1260-00C. The choices are as follows:
a. Default:
0 for multiple secondary addressing
1 for multiple primary addressing
b. Always a particular GPIB address
c. No GPIB address
GPIB Flags
MultPrimary: Multiple primary addressing mode is set.
MultSecond: Multiple secondary addressing mode is set.
Others: These flags are for information purposes only; do
not modify.
GPIB Address to Avoid
This is a 32-bit bit mask of GPIB addresses to avoid during
address assignment for either multiple primary or multiple
secondary addressing modes.
Code Instrument Block
Base
This parameter specifies the local 1260-00C address base for
Static Code Instruments.
Code Instrument Number
of RAM Blocks
This parameter specifies the number of 4-kilobyte RAM blocks
allocated from the block base for use by Static Code Instruments.
Resident Code Instrument
Locations
These parameters specify the base addresses of EPROMed Code
Instruments. These Code Instruments are automatically started
up after the Resource Manager operations complete.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
