1260-00C User Manual
Local Command Set 4-70
CIAddr?
Purpose:
Get the local base RAM address of a CI.
Query
Syntax:
CIAddr? <logical address>
Response:
Program response:
<base address>
<CRLF>
where
<base address>
is the CI's base
address in decimal.
Console response:
CI at Logical Address <logical
address> base Local Address is <hex
base address>
<CRLF>
where
<hex base address>
is the CI's base
address in C language hexadecimal notation.
Example:
Get the local address of the CI at Logical Address
9.
CIAddr? 9
CIArea
Purpose:
Change the location and size of the CI RAM area.
Command
Syntax:
CIArea <Base Address>, <Number of
blocks>
Action:
Sets the CI global RAM to start at
<Base
Address>,
and span
<Number of blocks>
blocks of 4096 bytes each.
The default base address and size of the CI RAM
area are set by the non-volatile configuration
parameters
CI Block Base
and
CI Num
Blocks
.
<Base Address>
is the new base address of the
CI RAM area. It must be a multiple of 4096 decimal
(1000h), and must be in the region above the top of
pSOS Region 1 and below the top of memory.
pSOS Region 1 starts at 10000h, and its size is
determined by the non-volatile configuration
parameter
Region 1 Size.
For example, if
Region 1 Size
= 60000h, the lowest allowed
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
