1260-00C User Manual
Local Command Set 4-21
a DC system.
DCGrantDev
can be used only to
configure the initial Commander/Servant hierarchy
of a DC system, and before
DCBNOSend
is used to
cause the system to enter the Normal Operation
substate.
Command
Syntax:
DCGrantDev <Commander's logical
address>, <Servant's logical address>
Action:
DCGrantDev
sends the Device Grant command
to the Commander at
<Commander's logical
address>
, granting it the device at
<Servant's
logical address>
.
Example:
Grant Servant at Logical Address 7 to Commander
at Logical Address 5.
DCGrantDev 5,7
DCSystem?
Purpose:
Determine if the system is a DC system. A system
is DC if it has at least one DC device.
Query
Syntax:
DCSystem?
Response:
Program response:
1
<CRLF>
if it is a DC system, or
0
<CRLF>
if it is not a DC system, or if it is no longer
dynamically configurable because the Begin Normal
Operation command has already been sent to the
top-level Commanders through the
DCBNOSend
local command.
Console response:
This IS a Dynamic Configured
system.
<CRLF>
if it is a DC system, or
This is NOT a Dynamic Configured
system.
<CRLF>
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
