1260-00C User Manual
Local Command Set 4-74
Query
Syntax:
CIList?
Response:
Program response:
<ci la1>,<ci la2>, . . .,<ci
laN>
<CRLF>
where
<ci laJ>
is the logical address of the Jth
local CI.
N
is the total number of local CIs.
Console response:
Local CI Logical Addresses are: <ci
la1>,<ci la2>, . . .,
<ci laN>
<CRLF>
DCIDownLdPI
Purpose:
Download a Position Independent (PI) CI to RAM
and start running it.
Command
Syntax:
DCIDownLdPI [<Boolean>]
Action:
Bytes of code and data (up to the number
requested in the
DCISetupPI?
command) are
downloaded from the command source. When the
download is complete, the pSOS processes
associated with the PI DCI are initiated.
DCIs can only be downloaded from the GPIB port or
via Word Serial Protocol, because the download is
terminated on GPIB EOI or the Word Serial
END
command. Because there is no analogy for EOI or
END for the serial port (that is, a carriage return is a
valid binary number), it cannot be used to download
PI DCIs.
If
<Boolean>
is 1, debug statements are printed
to the serial port during the various stages of PI DCI
initialization. If
<Boolean>
is 0 or if it is omitted,
the debug statements are not output. The debug
printing mode is only available with the development
firmware option.
The
DCIDownLdPI
command should always be
immediately preceded by a
DCISetupPI?
command that configures the download
parameters. Executing intermediate 1260-00C
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
