1260-00C User Manual
Local Command Set 4-6
<Command Syntax>
<Command description
>
<CRLF>
Example:
List syntax and descriptions of general configuration
and GPIB address commands.
Help? gc,sa
General
Configuration
Commands and
Queries
The general configuration commands and queries are described
on the following pages.
•
CONF
•
ConsoleEna
•
ConsMode
•
DIAG
•
DPRAM?
•
NVconf?
•
OBRAM?
•
ProgMode
•
WordSerEna
The
ConsMode
and
ProgMode
commands enable and disable the
console and program response modes for the port originating the
command.
The
ConsoleEna
and
WordSerEna
commands control access to
the local command set from the RS-232 and VXI Word Serial
ports.
The
NVconf?
query returns the contents of the onboard non-
volatile memory.
CONF
reboots the 1260-00C and enters the non-
volatile configuration editor.
DIAG
reboots the 1260-00C and enters diagnostic mode.
The
OBRAM?
query can be used to determine the amount of
1260-00C installed RAM, and the
DPRAM?
query returns the
amount of the installed RAM that is shared with VXI A24 space.
CONF
Purpose:
Reboot into non-volatile configuration mode.
Command
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
