- 76 -
9901.00.34DE00; 02.2017
Subject to technical modifications
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
Adjustment - skimmer with round rod
H
1.
2.
2.
3.
a
Ź
1.) Undo the clamping bolt.
Ź
2.) Adjust the skimmer’s working depth by
moving.
Ź
3.) Tighten the clamping bolt to the correct
torque.
Ź
Adjust all skimmers to the same working depth.
Torque
Size
Quality grade 10.9
:LGWKDFURVVÀDWV
Nm
lb-ft
M20
661
488
30
24.4.2 Adjusting the skimmer with round rod’s side
overlap
Adjustment instructions
B
% VLGHRYHUODSIDFWRU\VHWWLQJDSSUR[FP
•
After adjusting the overlap, the skimmer's
throwing angle must be re-adjusted, see
chapter 24.4.3 - page 77.
Adjustment
1.
a
2.
3.
Ź
1.) Undo the fastening screws.
Ź
2.) Adjust the skimmer by turning the rod to the
desired overlap.
Ź
3.) Tighten the fastening screws to the correct
torque.
Ź
Adjust all skimmers to the same overlap.
NOTE
The factory default setting is indicated by
the red mark (
a
).
Torque (observe the quality grade)
Size
Quality grade 8.8
:LGWKDFURVVÀDWV
Nm
lb-ft
M20
464
342
30
Size
Quality grade
10.9
:LGWKDFURVVÀDWV
Nm
lb-ft
M20
661
488
30
