- 80 -
9901.00.34DE00; 02.2017
Subject to technical modifications
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
26 P
ARKING
THE
IMPLEMENT
WARNING
Risk of accident when parking the
implement.
• Take note of all crushing and shearing
points on the implement.
• Secure the parked implement to
prevent it rolling away and tipping.
Required work
•
Fold the parking support out and adjust the
length
•
Move the subsoiler into the storage position
•
Turn the combination wheel into the storage
position.
26.1 Prerequisite
The following description requires the plough to be
in the transport position.
Transport position - plough with depth control
wheel
Transport position - plough with combination
wheel
26.2 Note the following when parking
•
The hydraulic width adjusted must be pivoted in
to the narrow point.
•
Set the implement on the right-handed bodies.
•
Turn the ploughs with combination wheel from
the transport position into the working position.
•
If subsoilers are installed, pivot the subsoilers
on the ground side in; see chapter
•
Only set the implement down on solid ground.
•
Ensure that the implement is stable.
•
Use the supports provided (parking supports).
26.3 Fold the parking support out and
adjust the length
NOTE
On ploughs with a combination wheel, do
not fold the parking support out until the
plough has been turned to the storage
position.
Observe the description in chapter 26.5
"Parking the ploughs with combination
wheel" - page 82.
Fold out
3.
2.
1.
a
Ź
1.) Pull the parking support against the spring
pressure.
Ź
2.) Fold the parking support down and...
Ź
3.) ... lock it into the locking device (
a
).
