- 88 -
9901.00.34DE00; 02.2017
Subject to technical modifications
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
31 R
EPLACING
THE
SHEAR
BOLT
ON
PLOUGH
BODIES
DANGER
Risk of injury due to heavy and sharp-
edged components.
• Gloves must always be worn.
Risk of accident when rectifying the
fault.
• If the implement is raised, do not work
underneath it whilst unsecured.
• Secure the implement to prevent it
lowering.
,IWKHPHFKDQLFDOVWRQHSURWHFWLRQV\VWHPWULJJHUV
Ź
Stop immediately.
Ź
Lift the plough out of the furrow and park on
level ground.
Ź
Switch off the tractor and secure it to prevent it
rolling away.
Ź
Secure tractor against being started up
(remove ignition key).
Tools
SW 36
SW 24
SW 30
AF = Width Across Flats
•
Rabe special ring spanners supplied.
•
19 mm ring spanner
Repair instructions
•
Always use original shear bolts.
•
Never replace shear bolts with standard bolts.
•
Replace damaged bolts with bolts of the same
strength category.
•
The sheered plough body must point
downwards.
•
Only approach the sheered plough body from
the rear.
31.1 Replace the shear bolt
Fastening
2
1
3
4
1.) Shear bolt1)
2) Pivot bolt1)
3) Washers2)
4) Nuts
1) The bolt sizes are listed in the torque tables on page 100
2) The number of washers may vary. Observe the installation
situation on-site.
Repair
DANGER
Risk of accident when undoing the
pivot bolt.
There is an increased risk of accident
when the plough body swivels back.
• The sheered plough body must point
downwards.
• Only approach the plough body from
the rear.
• Use RABE special ring spanners.
