- 53 -
9901.00.34DE00; 02.2017
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
17.1 Information on the model
The following description assumes that the plough
is on the right-hand side in the storage or working
position.
17.2 Required preparations
Ź
"Coupling the implement" - page 44
Ź
"Connect the hydraulic lines" - page 46
Ź
"Sliding in and folding up the parking support" -
page 48
Ź
Set the plough down.
Ź
Secure the tractor / implement to prevent it
rolling away.
Ź
Switch off the tractor engine.
Ź
Secure the tractor to prevent it being started up
without authorization - remove the ignition key.
17.3 General adjustment instructions
Carry out the pre-adjustments on level, solid
ground.
7KHWUDFWLRQSRLQWDQGWKH¿UVWERG\ZRUNLQJZLGWK
can be adjusted before use on the tractor. Fine
adjustment is then performed when ploughing.
,IWKHWUDFWLRQSRLQWDQG¿UVWERG\ZRUNLQJZLGWKDUH
to be adjusted,
•
¿UVWDGMXVWWKHWUDFWLRQSRLQW
•
DQGWKHQWKH¿UVWERG\ZRUNLQJZLGWK
17 P
REPARING
THE
MACHINE
,
PRE
-
ADJUSTMENTS
DANGER
General risk of accident while working
with the implement.
• Observe the safety instructions in the
chapter „For your safety“ - page 23
in all cases.
• Turn off the tractor’s engine and
remove the key from the ignition.
Risk of accident due to crushing
between the tractor and the implement.
• When coupling the implement, do not
stand between the tractor and the
implement.
WARNING
Risk of accident due to crushing
during setup and adjustment work.
• Care must be taken during all work to
ensure that the implement is stable and
has been secured to prevent it rolling
away.
• Support the raised implement to
prevent lowering.
The following adjustments are described in the
IROORZLQJFKDSWHUV
•
Pre-adjusting the traction point
•
$GMXVWLQJWKH¿UVWERG\ZRUNLQJZLGWK
