- 83 -
9901.00.34DE00; 02.2017
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
Ź
2.)
Actuate the control device until
the plough has rotated onto the
right-hand side completely.
For hydraulic frame slewing,
actuate the control device until
hydraulic frame slewing is pivoted
out completely again.
Working position
Once the plough is in the end position.
Ź
3.)
Release the control device.
Ź
4.)
Lower the plough.
26.5.4 Turning the combination wheel into the storage
position
The combination wheel can be left in the transport
position for storage.
26.5.5 Parking the plough
Ź
"Fold the parking support out and adjust the
length" - page 80.
Storage position
b
a
Ź
Use the three-point power lift to lower
the plough until the parking support
(
a
) and the plough tines (
b
) are on the
ground.
26.6 Parking the ploughs with depth control
wheel
Ź
"Fold the parking support out and adjust the
length" - page 80.
Transport position - Depth control wheel
Storage position - Depth control wheel
b
a
Ź
Use the three-point power lift to lower
the plough until the parking support
(
a
) and the plough tines (
b
) are on the
ground.
