- 26 -
9901.00.34DE00; 02.2017
Subject to technical modifications
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
DANGER
Danger of rupturing from mechanical
processing or deformation.
• No drilling or other mechanical
processing on the pressure tank is
permitted.
• Take implements with damaged
pressure tanks out of service
immediately and secure them to
prevent re-use.
• Immediate replace damaged pressure
tanks.
WARNING
Risk of burning due to hot components.
The pressure tank can become very hot
during operation.
• Do not touch the pressure tank
immediately after use.
5.10 Safety instructions - oils and greases
WARNING
Oils and greases are harmful to health.
• Observe the safety data sheet (from
the oil supplier) for the oil and grease
used.
Health hazard due to continuous skin
contact.
Frequent or extended contact with
hydraulic oil or clothes soaked in oil can
cause skin conditions.
• Change clothes soaked in oil.
• Do not put cloths that are soaked in oil
into pockets on the work clothing.
• After working with hydraulic oil, wash
your hands and use hand cream.
5.11 Safety instructions - Travelling by
road / transport
WARNING
Risk of accident while transporting the
implement by road.
• Pay attention to national laws and
regulations on the use of public roads.
• Ensure that the lights on your
implement are in an excellent condition.
• Lock the hydraulic control devices to
prevent accidental operation before
each journey by road.
• Check the immediate vicinity before
moving off. No item or person may be
in the immediate vicinity.
• The operator must not leave the
operator's platform while the vehicle is
in motion.
Risk of accident due to unsecured
attachments.
• Secure all attachments to prevent
uncontrolled movements using the
retaining system provided (transport
lock) or other suitable measures.
• Always use the covers supplied
(e.g. tine protection equipment).
Risk of accident due to wide working
radius of the implement.
During cornering, the wide working radius
of the implement can cause accidents.
• When cornering and making turns, pay
DWWHQWLRQWRREVWDFOHVDQGWKHWUDI¿F
situation.
Risk of tipping due to the large
centrifugal mass of the implement.
When cornering, the large centrifugal
mass can cause the implement to tip over.
• Drive slowing when cornering and
making turns.
5.12
6DIHW\LQVWUXFWLRQVÀHOGXVH
WARNING
Risk of accident while using the
LPSOHPHQWLQWKH¿HOG
• Prior to starting work, familiarize
yourself with all equipment and
operating controls, and their functions.
• Only perform adjustment work with the
implement lowered.
Risk of tipping due to the large
centrifugal mass of the implement.
When working on a slope, the large
centrifugal mass can cause the implement
to tip over.
• Pay attention to the position of the
centre of gravity when lifting and
turning.
