- 49 -
9901.00.34DE00; 02.2017
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
14 C
ARRYING
OUT
THE
TURNING
TEST
DANGER
Risk of accident when turning the
plough.
• Before turning, ensure that there is
nobody within the turning range.
CAUTION
Risk of accident due to collision with
the raised or turning plough.
• Make sure that the implement does not
collide with anything in its raised state,
even when turning.
• Close the rear window on the tractor
before carrying out the turning test.
Information on the model
The following description assumes that the plough
is on the right-hand side in the storage or working
position.
Checks before the turning test
9
The support (
a
) is folded up and secured - see
chapter "Sliding in and folding up the parking
support" - page 48.
9
The central lock is released - see chapter
20.2.2 - page 62
Carrying out the turning test
H
Ź
Use the three-point power lift to lift the
plough up completely.
H = Minimum lifting height for the bottom link
H = 85 cm
Ź
Actuate the control device until the
plough has turned.
For hydraulic frame slewing, actuate
the control device until hydraulic
frame slewing is pivoted out
completely again.
Once the plough is in the end position
Ź
Release the control device.
After approximately 8 seconds, a new turn can be
initiated.
