NOTE:
If
Multi Image HD
is enabled and Images are stored on the hard drive
and then the Autoloader is operated with Multi Image HD set to NO
all the previous images may be lost.
Ask Quantity
If set to YES, the user will be prompted for a quantity at the start of a
copy/compare job. If set to NO, the machine will copy until told to stop by
pressing and holding the STOP key.
Async Copying
When set to YES, the system will run the drives asynchronously. Setting
this to NO will increase the time taken for duplication, since all drives
must be loaded or unloaded before duplication can continue
(synchronous operation).
Check Blank Size
If set to YES, the copier will check that the image will fit on the blank disc
before starting to write. If set to NO, the copier will attempt to write the
image to the disc, even if the blank is not large enough. This may mean
that copies are rejected, because the blank disc did not have sufficient
room. This feature allows discs to be over burned.
Master Drive
This option allows the user to select which drive (recorder or CD-ROM
drive if installed) will be used to read the master. Use the left and right
arrow keys to select the desired drive.
Printer
This selects the printer type. Cycle through the options until the one
specific to your printer type is displayed.
Print First
Setting this to YES will Print the discs prior to loading them into the
drives. When set to NO, the system will only print to discs that have
been recorded.
Check Reject Full
This should be sent to YES. The rejected disc count is kept, and once it
reaches a trigger level, duplication will halt - waiting user intervention to
clear the reject. This prevents the fouling of the lower drives by the reject
pile, and it is recommended that this be always set to YES. The count is
made on a ‘per Job’ basis, and so it is expected that the reject area be
cleared at the start of any duplication job.
21 of 37
